Tunturi reborn
Updated: May 3, 2021
In september 2020 I received good old Finnish iron "Tunturi" as a birthday gift (had long wished to have a retro bike for commuting in town). It was pretty well preserved- it had spent ~15 years in dry cellar. Previous owner said that last ride before putting the bike to cellar was from Tartu to Vormsi island during one whole day (Tartu-Rohuküla harbour distance is ~250km :) ).
I don't know the bike's model and exact year but would guess it's 30-40y old product. Will try to find it out in near future. Since the bike looks quite legendary and quite a few bike technicians who I have talked about it have said this kind of bike is much more durable than bikes novadays and definitely is worth preserving I decided to give it new life. Goal is to renovate the bike from ground up by trying to preserve as authentic look as possible.
Starting off: wheels
Hubs, axles and bearings:

Opening up the front wheel hub revealed a solid-axle hub with ball-and-retainer type bearings. The grease was pretty thick on them and looked like
it definitely needs refreshing.
The bearing on the left got cleaned already, the right one still has the blackish dirty old grease on it.

I wiped out all the grease and dirt from inner and outer sides of hub as well. For cleaning I used a rug, a chain-cleaner brush from my old motorbike and an old toothbrush.
Wrestled quite a long time with opening also the nuts on the left end of axle but had to give up. Later figured they might be stuck by design.
For cleaning the bearings I used special liquid which should wash of all kinds of oils and greases from metal. Kept the bearings soaked in it few minutes and after that cleaned them with the toothbrush:

Anyways the end-result was pretty nice: I cleaned all the inner parts of the hub with a rug, applied new grease on the axle and bearings. Was rather generous with the amount of it.


Tires
First wheel had good old Nokia tire. Rear wheel had some Scwalbe-tire on it. Both of them looked extremely fractured and tired. Therefore spent some time looking for as authentic white-edged tires from the market as possible. Ordered (by the picture) from one e-shop a pair of tires which I thought were perfect but when they arrived they were far from what the picture showed in e-shop. Luckily when I visited a local bicycle store in Tartu I saw just the tires I needed hanging on their wall: Scwalbe road cruiser model with 700-35 size for my 622-20 rim.
Comparison with old and new tire in pic below:

While changing tires I also cleaned the rim and discovered both rims had small fracture-like mark on one place with some rust around it.

I just in case checked from local bicycle store if this might be the welding-point of the rim and they confirmed. Also this looked fine in their opinion and no need to worry about the rust-like looks of it:
After applying the new tires they looked exactly what I was hoping for:

New tire is a little bit wider than the original one but fits still perfectly inside the fork and under the metal-fender.
Gears

The cogwheels were bit rusty but not too dirty. Had to check some tutorials of how to open this thing up and discovered I'd need chain-whips for that:

Still opened them up, soaked and brushed them in grease-removal chemical. I used rubber-gloves for that but clearly the rubber was too thin and fingertips came off literally by the end:


After that the rust was even more visible when old dirt was removed. To get rid of rust I decided to use sandpaper of 180 density (checked many other methods which included mostly some acids or electrolysis but sandpaper seemed the easiest and most effective). The end result wasn't ideally shiny but that wasn't also something which I aimed for. Before rust removal the gears looked like the following:

After cleaning the old dirt and using 180-sandpaper on them for a little while the outcome was like this:



Comments